This 10 count box is Static Dissipative.  It will hold parts .25” square x 2.8mm thick.
Call for samples and assistance.
This box can be customized to hold your specific size.  See the main image for the 10S-250 on left and two examples of customized boxes using the same exterior size. 
You can have exact interior needed and only pay for the insert to customize the existing box.

static dissipative package to hold 50 parts 6.3mm square or raound.

This 100 count box is Static Dissipative.  By using #102 FLAT LID, this box will hold parts .271” long x .271” wide x .078” thick.

This 100 count box is Static Dissipative.  It will hold parts .5” OD x .080” thick, with the long ribbed lid shown on the right side of the cross section image below.

Using a flat lid, you can hold parts up to .937” OD.  By using ribbed lids, you can hold a range of parts, including small square parts. See examples shown in Image #1.  Call for samples and assistance.
This box can be customized to hold your specific size.
You only pay for the insert to customize the existing box.

static dissipative package to hold 10 parts 12.7 square or raound.

This 52 count box is Static Dissipative.  It will hold parts .5” OD x .080” thick,  with lid shown.

Using a deeper lid, you can hold parts up to .750” x .5”.  Call for samples and assistance.
This box can be customized to hold your specific size.
You only pay for the insert to customize the existing box.

This 100 count box is Static Dissipative.  It will hold parts .58” OD x .080” thick, with the long ribbed lid shown on the right side of the cross section image below.

Using a flat lid, you can hold parts up to .937” OD.  By using ribbed lids, you can hold a range of parts, including small square parts. See examples shown in Image #2.  Call for samples and assistance.
This box can be customized to hold your specific size.
You only pay for the insert to customize the existing box.

This 100 count box is Static Dissipative.  It will hold parts .688” OD x .080” thick, with the long ribbed lid shown on the right side of the cross section image below.

Using a flat lid, you can hold parts up to .937” OD.  By using ribbed lids, you can hold a range of parts, including small square parts. See examples shown in Image #2.  Call for samples and assistance.
This box can be customized to hold your specific size.
You only pay for the insert to customize the existing box.

Static dissipative 30 count pack for .825” OD glass.  This reversible box can be customized by changing the mold insert creating package interior,You only pay for the mold insert to meet your exact requirsment.

This 100 count box is Static Dissipative.  By using #102 FLAT LID, this box will hold parts .850” long x .800” wide x .110” thick.
By using deeper lids, you can hold taller parts.  Using #102D lid shown on the drawing, this box will hold parts up to 1.42” tall.  Using lid #201-01 allows parts up to 1.82” tall to be protected.
A flat polyethylene pad can be used to take up space beneath the lid if your part doesn’t go all the way up.  This prevents parts from wiggling in their respective pocket.

Call for samples and assistance.
This box can be customized to hold your specific size.  See image #2 FOR EXAMPLES of customized boxes using the same exterior size. 
You only pay for the insert to customize the existing box.

This 100 count box is Static Dissipative.  It will hold parts .937” OD x .080” thick, with the long ribbed lid shown on the right side of the cross section image below.

Using a flat lid, you can hold parts up to .937” OD.  By using ribbed lids, you can hold a range of parts, including small square parts. See examples shown in Image #2.  Call for samples and assistance.
This box can be customized to hold your specific size.
You only pay for the insert to customize the existing box.

Static dissipative ten pack for 1” OD x .360” thick parts.  This box can be customized by changing the insert which creates interior.  see examples in Inage 1

This 52 count box is Static Dissipative.  It will hold parts 1.0” OD x .080” thick,  with lid shown.

Using a deeper lid, you can hold parts up to 1.250” x 1.0”.  Call for samples and assistance.
This box can be customized to hold your specific size.
You only pay for the insert to customize the existing box.

This 40 count box is Static Dissipative.  It will hold parts 1” OD x .25” thick.
Call for samples and assistance.
This box can be customized to hold your specific size.  See image #3 FOR EXAMPLES of customized boxes using the same exterior size. 
You only pay for the insert to customize the existing box.

This 10 count box is Static Dissipative.  It will hold parts 1.0” OD x .400” thick, with lid shown on drawing.

This 240 count box is Static Dissipative.  It will hold parts 1.0” square (or round) x .10”

By using deeper lids (#202 deep lid shown in cross section), you can hold taller parts.  Call for samples and assistance.
This box can be customized to hold your specific size.
You only pay for the insert to customize the existing box.

This 100 count box is Static Dissipative.  By using #102 FLAT LID, this box will hold parts 1.00” long x 1.00” wide x .118” thick.
By using deeper lids, you can hold taller parts.  Using #102D lid shown on the drawing, this box will hold parts up to 1.63” tall.  Using lid #201-01 allows parts up to 2.06”. Using lid #102 DD Lid allows parts up to 2.62” tall to be protected. A flat polyethylene pad can be used to take up space beneath the lid if your part doesn’t go all the way up.  This prevents parts from wiggling in their respective pocket.

Call for samples and assistance.
This box can be customized to hold your specific size.  See image #2 FOR EXAMPLES of customized boxes using the same exterior size. 
You only pay for the insert to customize the existing box.

Static dissipative 30 count pack for 1.0” OD glass.  This reversible box can be customized by changing the mold insert creating package interior, You only pay for the mold insert to meet your exact requirsment.

This 50 count box is Static Dissipative.  It will hold parts 1.080” OD x .090” thick.
Call for samples and assistance.
This box can be customized to hold your specific size. We customized boxes using the same exterior size. You only pay for the insert to customize the existing box.

This 50 count box is Static Dissipative.  It will hold parts 1.10” Round or Square x .080” thick,  with lid shown.

Static dissipative 10 count pack for 1.181” OD x .271” thick glass.

Static dissipative 10 count pack for 1.181” OD x .082” thick glass.

Static dissipative 40 count pack for 1.185”OD x .240” glass.

Static dissipative 20 count handling tray for 1.2” OD x 0.2” round parts.
Parts can be easily inserted and removed due to the recess on either side of the part slot. Ideal for in house work-in-process use.

This 100 count box is Static Dissipative.  It will hold parts 1.25” OD x .100 thick.
Call for samples and assistance.
This box can be customized to hold your specific size.  See image #3 FOR EXAMPLES of customized boxes using the same exterior size. 
You only pay for the insert to customize the existing box.

Static dissipative 100-count box with flat lid for 1.312” Round.

Static dissipative 25 count pack for 1.362"OD glass.  This reversible box can be customized by changing the mold insert creating package interior,You only pay for the mold insert to meet your exact requirsment.

Static dissipative 26 count pack for 1.388” OD glass.

This 100 count box is Static Dissipative.  It will hold parts 1.4”” x 1.0” x .10”

By using deeper lids (#202 deep lid shown in cross section), you can hold taller parts.  Call for samples and assistance.
This box can be customized to hold your specific size.
You only pay for the insert to customize the existing box.

This 50 count box is Static Dissipative.  By using #102 FLAT LID, this box will hold parts 1.40” long x 1.40” wide x .110” thick.
By using deeper lids, you can hold taller parts.  Using #102D lid shown on the drawing, this box will hold parts up to 1.40” tall.  Using lid #201-01 allows parts up to 2.03”. Using lid #105 DD allows parts up to 3.00” tall to be protected. A flat polyethylene pad can be used to take up space beneath the lid if your part doesn’t go all the way up.  This prevents parts from wiggling in their respective pocket.

Call for samples and assistance.
This box can be customized to hold your specific size.  See image #2 FOR EXAMPLES of customized boxes using the same exterior size. 
You only pay for the insert to customize the existing box.

Static dissipative 26 count pack for 1.425”OD x .040” glass.

Static dissipative 25 count pack for 1.5” OD glass.  This reversible box can be customized by changing the mold insert creating package interior, see examples shown in Image #1.
You only pay for the mold insert to meet your exact requirsment.

This 75 count box is Static Dissipative.  By using #102 FLAT LID, this box will hold parts 1.5” long x 1.5” wide x .118” thick.
By using deeper lids, you can hold taller parts.  Using #102D lid shown on the drawing, this box will hold parts up to 2.13” tall.  Using lid #201-01 allows parts up to 2.55”. Using lid #102 DD Lid allows parts up to 3.125” tall to be protected. A flat polyethylene pad can be used to take up space beneath the lid if your part doesn’t go all the way up.  This prevents parts from wiggling in their respective pocket.

Call for samples and assistance.
This box can be customized to hold your specific size.  See image #2 FOR EXAMPLES of customized boxes using the same exterior size. 
You only pay for the insert to customize the existing box.

Static Dissipative tray for 1.5” OD wafers

Static dissipative 100-count box with flat lid for 1.562” Round.

Static dissipative 25 count pack for 1.562"OD glass.  This reversible box can be customized by changing the mold insert creating package interior,You only pay for the mold insert to meet your exact requirsment.

Static dissipative 30 count pack for 1.575” OD glass.

This 25 count box is Static Dissipative.  It will hold parts 1.575” OD x .315” thick, with lid shown on drawing.

Static dissipative 60-count box with #201-01 Deep lid for 1.6.25"OD x .051” Thick.

This 100 count box is Static Dissipative.  By using #102 FLAT LID, this box will hold parts 1.00” long x 1.00” wide x .118” thick.
By using deeper lids, you can hold taller parts.  Using #102D lid shown on the drawing, this box will hold parts up to 1.63” tall.  Using lid #201-01 allows parts up to 2.06”. Using lid #105 DD allows parts up to 2.62” tall to be protected. A flat polyethylene pad can be used to take up space beneath the lid if your part doesn’t go all the way up.  This prevents parts from wiggling in their respective pocket.

Call for samples and assistance.
This box can be customized to hold your specific size.  See image #2 FOR EXAMPLES of customized boxes using the same exterior size. 
You only pay for the insert to customize the existing box.

Static dissipative 30 count pack for 1.653” OD glass.

Static dissipative 50-count box with flat lid for 1.650” Round.

Static dissipative 30 count pack for 1.740” OD glass.

This 240 count box is Static Dissipative.  It will hold parts 1.75” x 1.0” x .110”

By using deeper lids (#202 deep lid shown in cross section), you can hold taller parts.  Call for samples and assistance.
This box can be customized to hold your specific size.
You only pay for the insert to customize the existing box.

Static dissipative 30 count pack for 1.770"OD x .040” glass.

Static dissipative 30 count pack for 1.811” OD glass.

This 160 count box is Static Dissipative.  It will hold parts 1.99” x 1.87” x 1.87”

By using deeper lids (#202 deep lid shown in cross section), you can hold taller parts.  Call for samples and assistance.
This box can be customized to hold your specific size.
You only pay for the insert to customize the existing box.

Static dissipative 58 count pack for 1.889” OD glass.

Static dissipative 30 count pack for 1.929” OD glass.

This 40 count box is Static Dissipative.  It will hold parts 1.950” OD x .040” thick.
Call for samples and assistance.
This box can be customized to hold your specific size. You only pay for the insert to customize the existing box.

This 252 count box is Static Dissipative.  It will hold parts 1.96” x .860” x .125”

By using deeper lids (#202 deep lid shown in cross section), you can hold taller parts.  Call for samples and assistance.
This box can be customized to hold your specific size.
You only pay for the insert to customize the existing box.

Static dissipative 30 count pack for 1.968” OD glass.

This 56 count box is Static Dissipative.  By using #102 FLAT LID, this box will hold parts 2.0” long x 1.0” wide x .161” thick.
By using deeper lids, you can hold taller parts.  Using #102D lid shown on the drawing, this box will hold parts up to 1.60” tall.  Using lid #201-01 allows parts up to 2.0”. Using lid #102 DD Lid allows parts up to 2.625” tall to be protected. A flat polyethylene pad can be used to take up space beneath the lid if your part doesn’t go all the way up.  This prevents parts from wiggling in their respective pocket.

Call for samples and assistance.
This box can be customized to hold your specific size.  See image #2 FOR EXAMPLES of customized boxes using the same exterior size. 
You only pay for the insert to customize the existing box.

This 56 count box is Static Dissipative.  By using #102 FLAT LID, this box will hold parts 2.0” long x 1.0” wide x .161” thick.
By using deeper lids, you can hold taller parts.  Using #102D lid shown on the drawing, this box will hold parts up to 1.60” tall.  Using lid #201-01 allows parts up to 2.0”. Using lid #102 DD Lid allows parts up to 2.625” tall to be protected. A flat polyethylene pad can be used to take up space beneath the lid if your part doesn’t go all the way up.  This prevents parts from wiggling in their respective pocket.

Call for samples and assistance.
This box can be customized to hold your specific size.  See image #2 FOR EXAMPLES of customized boxes using the same exterior size. 
You only pay for the insert to customize the existing box.

This 24 count box is Static Dissipative.  By using #102 FLAT LID, this box will hold parts 2.0” long x 1.75” wide x .50” thick.
By using deeper lids, you can hold taller parts.  Using #102D lid shown on the drawing, this box will hold parts up to 2.625” tall.  Using lid #201-01 allows parts up to 3.05”. Using lid #102 DD Lid allows parts up to 3.625” tall to be protected. A flat polyethylene pad can be used to take up space beneath the lid if your part doesn’t go all the way up.  This prevents parts from wiggling in their respective pocket.

Call for samples and assistance.
This box can be customized to hold your specific size.  See image #2 FOR EXAMPLES of customized boxes using the same exterior size. 
You only pay for the insert to customize the existing box.

This 56 count box is Static Dissipative.  By using #102 FLAT LID, this box will hold parts 2.0” long x 1.0” wide x .161” thick.
By using deeper lids, you can hold taller parts.  Using #102D lid shown on the drawing, this box will hold parts up to 1.60” tall.  Using lid #201-01 allows parts up to 2.0”. Using lid #102 DD Lid allows parts up to 2.625” tall to be protected. A flat polyethylene pad can be used to take up space beneath the lid if your part doesn’t go all the way up.  This prevents parts from wiggling in their respective pocket.

Call for samples and assistance.
This box can be customized to hold your specific size.  See image #2 FOR EXAMPLES of customized boxes using the same exterior size. 
You only pay for the insert to customize the existing box.

Static dissipative 100-count box with flat lid for 2” Round.

This 10 count box is Static Dissipative.  It will hold parts 2.0” OD x .390” thick, with lid shown on drawing.

This 18 count box is Static Dissipative.  It will hold parts 2.00” OD x variable thicknesses, with lid shown on drawing.

This 50 count box is Static Dissipative.  By using #102 FLAT LID, this box will hold parts 1.40” long x 1.40” wide x .110” thick.
By using deeper lids, you can hold taller parts.  Using #102D lid shown on the drawing, this box will hold parts up to 1.40” tall.  Using lid #201-01 allows parts up to 2.03”. Using lid #105 DD allows parts up to 3.00” tall to be protected. A flat polyethylene pad can be used to take up space beneath the lid if your part doesn’t go all the way up.  This prevents parts from wiggling in their respective pocket.

Call for samples and assistance.
This box can be customized to hold your specific size.  See image #2 FOR EXAMPLES of customized boxes using the same exterior size. 
You only pay for the insert to customize the existing box.

This 100 count box is Static Dissipative.  By using #102 FLAT LID, this box will hold parts 1.00” long x 1.00” wide x .118” thick.
By using deeper lids, you can hold taller parts.  Using #102D lid shown on the drawing, this box will hold parts up to 1.63” tall.  Using lid #201-01 allows parts up to 2.06”. Using lid #105 DD allows parts up to 2.62” tall to be protected. A flat polyethylene pad can be used to take up space beneath the lid if your part doesn’t go all the way up.  This prevents parts from wiggling in their respective pocket.

Call for samples and assistance.
This box can be customized to hold your specific size.  See image #2 FOR EXAMPLES of customized boxes using the same exterior size. 
You only pay for the insert to customize the existing box.

Static dissipative 50-count box with flat lid for 2” Round.

This 75 count box is Static Dissipative.  By using #102 FLAT LID, this box will hold parts 1.5” long x 1.5” wide x .118” thick.
By using deeper lids, you can hold taller parts.  Using #102D lid shown on the drawing, this box will hold parts up to 2.13” tall.  Using lid #201-01 allows parts up to 2.55”. Using lid #102 DD Lid allows parts up to 3.125” tall to be protected. A flat polyethylene pad can be used to take up space beneath the lid if your part doesn’t go all the way up.  This prevents parts from wiggling in their respective pocket.

Call for samples and assistance.
This box can be customized to hold your specific size.  See image #2 FOR EXAMPLES of customized boxes using the same exterior size. 
You only pay for the insert to customize the existing box.

Static dissipative 30 count pack for 2.140” OD glass.

Static dissipative 30 count pack for 2.20” OD glass.

This 40 count box is Static Dissipative.  By using #102 FLAT LID, this box will hold parts 2.23” long x 1.25” wide x .25” thick.
By using deeper lids, you can hold taller parts.  Using #102D lid shown on the drawing, this box will hold parts up to 1.875” tall.  Using lid #201-01 allows parts up to 2.30”. Using lid #102 DD Lid allows parts up to 2.875” tall to be protected. A flat polyethylene pad can be used to take up space beneath the lid if your part doesn’t go all the way up.  This prevents parts from wiggling in their respective pocket.

Call for samples and assistance.
This box can be customized to hold your specific size.  See image #2 FOR EXAMPLES of customized boxes using the same exterior size. 
You only pay for the insert to customize the existing box

This 40 count box is Static Dissipative.  By using #102 FLAT LID, this box will hold parts 2.23” long x 1.25” wide x .25” thick.
By using deeper lids, you can hold taller parts.  Using #102D lid shown on the drawing, this box will hold parts up to 1.875” tall.  Using lid #201-01 allows parts up to 2.30”. Using lid #102 DD Lid allows parts up to 2.875” tall to be protected. A flat polyethylene pad can be used to take up space beneath the lid if your part doesn’t go all the way up.  This prevents parts from wiggling in their respective pocket.

Call for samples and assistance.
This box can be customized to hold your specific size.  See image #2 FOR EXAMPLES of customized boxes using the same exterior size. 
You only pay for the insert to customize the existing box

This 40 count box is Static Dissipative.  By using #102 FLAT LID, this box will hold parts 2.23” long x 1.25” wide x .25” thick.
By using deeper lids, you can hold taller parts.  Using #102D lid shown on the drawing, this box will hold parts up to 1.875” tall.  Using lid #201-01 allows parts up to 2.30”. Using lid #102 DD Lid allows parts up to 2.875” tall to be protected. A flat polyethylene pad can be used to take up space beneath the lid if your part doesn’t go all the way up.  This prevents parts from wiggling in their respective pocket.

Call for samples and assistance.
This box can be customized to hold your specific size.  See image #2 FOR EXAMPLES of customized boxes using the same exterior size. 
You only pay for the insert to customize the existing box

This 50 count box is Static Dissipative.  It will hold parts 2.3” OD x .141” thick, with lid shown on drawing.

Static dissipative 50-count box with Deep lid for 2.300” Round.

Static dissipative 100-count box with flat lid for 3” Round.

Static dissipative 24 count pack for 2.362” OD glass.

Static dissipative 100-count box with deep lid for 2.370” Round.

This 50 count box is Static Dissipative.  By using #102 FLAT LID, this box will hold parts 1.40” long x 1.40” wide x .110” thick.
By using deeper lids, you can hold taller parts.  Using #102D lid shown on the drawing, this box will hold parts up to 1.40” tall.  Using lid #201-01 allows parts up to 2.03”. Using lid #105 DD allows parts up to 3.00” tall to be protected. A flat polyethylene pad can be used to take up space beneath the lid if your part doesn’t go all the way up.  This prevents parts from wiggling in their respective pocket.

Call for samples and assistance.
This box can be customized to hold your specific size.  See image #2 FOR EXAMPLES of customized boxes using the same exterior size. 
You only pay for the insert to customize the existing box.

Static dissipative 74 count pack for 2.480” OD glass.

This 50 count box is Static Dissipative.  It will hold parts 5mm thick x 52mm wide x 65mm tall ( 2.5” x 2.5” x 1.96” thick).
You can use deeper lids to hold long rectangles.  See Image #2 for examples.  Call for samples and assistance.
This box can be customized to hold your specific size.  See image #3 FOR EXAMPLES of customized boxes using the same exterior size.  You only pay for the insert to customize the existing box.

This 90 count box is Static Dissipative.  It will hold parts 2.5” x 2.5” x .065”

By using deeper lids (#202 deep lid shown in cross section), you can hold taller parts.  Call for samples and assistance.
This box can be customized to hold your specific size.
You only pay for the insert to customize the existing box.

This 50 count box is Static Dissipative.  By using #102 FLAT LID, this box will hold parts 2.5” long x .870” wide x .120” thick.
By using deeper lids, you can hold taller parts.  Using #102D lid shown on the drawing, this box will hold parts up to 1.46” tall.  Using lid #201-01 allows parts up to 1.88” tall to be protected.
A flat polyethylene pad can be used to take up space beneath the lid if your part doesn’t go all the way up.  This prevents parts from wiggling in their respective pocket.

Call for samples and assistance.
This box can be customized to hold your specific size.  See image #2 FOR EXAMPLES of customized boxes using the same exterior size. 
You only pay for the insert to customize the existing box.

This 50 count box is Static Dissipative.  By using #102 FLAT LID, this box will hold parts 2.5” long x .870” wide x .120” thick.
By using deeper lids, you can hold taller parts.  Using #102D lid shown on the drawing, this box will hold parts up to 1.46” tall.  Using lid #201-01 allows parts up to 1.88” tall to be protected.
A flat polyethylene pad can be used to take up space beneath the lid if your part doesn’t go all the way up.  This prevents parts from wiggling in their respective pocket.

Call for samples and assistance.
This box can be customized to hold your specific size.  See image #2 FOR EXAMPLES of customized boxes using the same exterior size. 
You only pay for the insert to customize the existing box.

This 50 count box is Static Dissipative.  By using #102 FLAT LID, this box will hold parts 2.5” long x .870” wide x .120” thick.
By using deeper lids, you can hold taller parts.  Using #102D lid shown on the drawing, this box will hold parts up to 1.46” tall.  Using lid #201-01 allows parts up to 1.88” tall to be protected.
A flat polyethylene pad can be used to take up space beneath the lid if your part doesn’t go all the way up.  This prevents parts from wiggling in their respective pocket.

Call for samples and assistance.
This box can be customized to hold your specific size.  See image #2 FOR EXAMPLES of customized boxes using the same exterior size. 
You only pay for the insert to customize the existing box.

This 18 count box is Static Dissipative.  By using #102 FLAT LID, this box will hold parts 2.5” long x 2.5” wide x .53” thick.
By using deeper lids, you can hold taller parts.  Using #102D lid shown on the drawing, this box will hold parts up to 3.125” tall.  Using lid #201-01 allows parts up to 3.55”. Using lid #102 DD Lid allows parts up to 4.125” tall to be protected. A flat polyethylene pad can be used to take up space beneath the lid if your part doesn’t go all the way up.  This prevents parts from wiggling in their respective pocket.

Call for samples and assistance.
This box can be customized to hold your specific size.  See image #2 FOR EXAMPLES of customized boxes using the same exterior size. 
You only pay for the insert to customize the existing box.

This 100 count box is Static Dissipative.  It will hold parts 2.5” OD x .051” thick.
Call for samples and assistance.

This 75 count box is Static Dissipative.  By using #102 FLAT LID, this box will hold parts 1.5” long x 1.5” wide x .118” thick.
By using deeper lids, you can hold taller parts.  Using #102D lid shown on the drawing, this box will hold parts up to 2.13” tall.  Using lid #201-01 allows parts up to 2.55”. Using lid #102 DD Lid allows parts up to 3.125” tall to be protected. A flat polyethylene pad can be used to take up space beneath the lid if your part doesn’t go all the way up.  This prevents parts from wiggling in their respective pocket.

Call for samples and assistance.
This box can be customized to hold your specific size.  See image #2 FOR EXAMPLES of customized boxes using the same exterior size. 
You only pay for the insert to customize the existing box.

Static dissipative 20 count pack for 2.559” OD glass.

Static Dissipative tray for 2.560” Square slides

This 100 count box is Static Dissipative.  By using #102 FLAT LID, this box will hold parts 1.00” long x 1.00” wide x .118” thick.
By using deeper lids, you can hold taller parts.  Using #102D lid shown on the drawing, this box will hold parts up to 1.63” tall.  Using lid #201-01 allows parts up to 2.06”. Using lid #105 DD allows parts up to 2.62” tall to be protected. A flat polyethylene pad can be used to take up space beneath the lid if your part doesn’t go all the way up.  This prevents parts from wiggling in their respective pocket.

Call for samples and assistance.
This box can be customized to hold your specific size.  See image #2 FOR EXAMPLES of customized boxes using the same exterior size. 
You only pay for the insert to customize the existing box.

This 24 count box is Static Dissipative.  By using #102 FLAT LID, this box will hold parts 2.0” long x 1.75” wide x .50” thick.
By using deeper lids, you can hold taller parts.  Using #102D lid shown on the drawing, this box will hold parts up to 2.625” tall.  Using lid #201-01 allows parts up to 3.05”. Using lid #102 DD Lid allows parts up to 3.625” tall to be protected. A flat polyethylene pad can be used to take up space beneath the lid if your part doesn’t go all the way up.  This prevents parts from wiggling in their respective pocket.

Call for samples and assistance.
This box can be customized to hold your specific size.  See image #2 FOR EXAMPLES of customized boxes using the same exterior size. 
You only pay for the insert to customize the existing box.

This 56 count box is Static Dissipative.  By using #102 FLAT LID, this box will hold parts 2.0” long x 1.0” wide x .161” thick.
By using deeper lids, you can hold taller parts.  Using #102D lid shown on the drawing, this box will hold parts up to 1.60” tall.  Using lid #201-01 allows parts up to 2.0”. Using lid #102 DD Lid allows parts up to 2.625” tall to be protected. A flat polyethylene pad can be used to take up space beneath the lid if your part doesn’t go all the way up.  This prevents parts from wiggling in their respective pocket.

Call for samples and assistance.
This box can be customized to hold your specific size.  See image #2 FOR EXAMPLES of customized boxes using the same exterior size. 
You only pay for the insert to customize the existing box.

Static dissipative 50-count box with flat lid for 2.635” squares.

Static dissipative 20 count package for 2.732” squares or round.  This mold has numerous inserts for larger sizes up to 3.75” square or round

Static dissipative 28 count pack for 2.2.755” OD glass.

This 40 count box is Static Dissipative.  By using #102 FLAT LID, this box will hold parts 2.23” long x 1.25” wide x .25” thick.
By using deeper lids, you can hold taller parts.  Using #102D lid shown on the drawing, this box will hold parts up to 1.875” tall.  Using lid #201-01 allows parts up to 2.30”. Using lid #102 DD Lid allows parts up to 2.875” tall to be protected. A flat polyethylene pad can be used to take up space beneath the lid if your part doesn’t go all the way up.  This prevents parts from wiggling in their respective pocket.

Call for samples and assistance.
This box can be customized to hold your specific size.  See image #2 FOR EXAMPLES of customized boxes using the same exterior size. 
You only pay for the insert to customize the existing box

Static dissipative 100-count box with Deep lid for 2.960” Round.

Static dissipative 100-count box with flat lid for 3” Round.

Static dissipative 25-count box with flat lid for 3” Round.

This 50 count box is Static Dissipative.  By using #102 FLAT LID, this box will hold parts 1.40” long x 1.40” wide x .110” thick.
By using deeper lids, you can hold taller parts.  Using #102D lid shown on the drawing, this box will hold parts up to 1.40” tall.  Using lid #201-01 allows parts up to 2.03”. Using lid #105 DD allows parts up to 3.00” tall to be protected. A flat polyethylene pad can be used to take up space beneath the lid if your part doesn’t go all the way up.  This prevents parts from wiggling in their respective pocket.

Call for samples and assistance.
This box can be customized to hold your specific size.  See image #2 FOR EXAMPLES of customized boxes using the same exterior size. 
You only pay for the insert to customize the existing box.

This 24 count box is Static Dissipative.  By using #102 FLAT LID, this box will hold parts 2.0” long x 1.75” wide x .50” thick.
By using deeper lids, you can hold taller parts.  Using #102D lid shown on the drawing, this box will hold parts up to 2.625” tall.  Using lid #201-01 allows parts up to 3.05”. Using lid #102 DD Lid allows parts up to 3.625” tall to be protected. A flat polyethylene pad can be used to take up space beneath the lid if your part doesn’t go all the way up.  This prevents parts from wiggling in their respective pocket.

Call for samples and assistance.
This box can be customized to hold your specific size.  See image #2 FOR EXAMPLES of customized boxes using the same exterior size. 
You only pay for the insert to customize the existing box.

Static dissipative 25-count box with flat lid for 3.1” Round.

This 75 count box is Static Dissipative.  By using #102 FLAT LID, this box will hold parts 1.5” long x 1.5” wide x .118” thick.
By using deeper lids, you can hold taller parts.  Using #102D lid shown on the drawing, this box will hold parts up to 2.13” tall.  Using lid #201-01 allows parts up to 2.55”. Using lid #102 DD Lid allows parts up to 3.125” tall to be protected. A flat polyethylene pad can be used to take up space beneath the lid if your part doesn’t go all the way up.  This prevents parts from wiggling in their respective pocket.

Call for samples and assistance.
This box can be customized to hold your specific size.  See image #2 FOR EXAMPLES of customized boxes using the same exterior size. 
You only pay for the insert to customize the existing box.

This 18 count box is Static Dissipative.  By using #102 FLAT LID, this box will hold parts 2.5” long x 2.5” wide x .53” thick.
By using deeper lids, you can hold taller parts.  Using #102D lid shown on the drawing, this box will hold parts up to 3.125” tall.  Using lid #201-01 allows parts up to 3.55”. Using lid #102 DD Lid allows parts up to 4.125” tall to be protected. A flat polyethylene pad can be used to take up space beneath the lid if your part doesn’t go all the way up.  This prevents parts from wiggling in their respective pocket.

Call for samples and assistance.
This box can be customized to hold your specific size.  See image #2 FOR EXAMPLES of customized boxes using the same exterior size. 
You only pay for the insert to customize the existing box.

Static dissipative 25 count package for 3” squares or round.  This mold has numerous inserts for larger sizes up to 3.75” square or round
Image 2 shows six count box for 3.5” squares up to .5” thick, #6x35

Static dissipative 25 count package for 3.25 inch square or round.
Rectangular parts can be held using the deep lid, available as an option.
This mold has numerous aluminum inserts to create a variety of box interiors. We can customize this box to meet your exact requirements.
Image 1 shows cross section of the box with a flat lid.

Static dissipative 15 count pack for 3.346” OD glass.

Static dissipative tray for 3.4” parts.  Use reversible top for full enclosure.

Static dissipative 20 count package for 3.5 inch square or round.
Rectangular parts can be held using the deep lid, available as an option. Image 1 shows cross section of the box with a flat lid.

Static dissipative 15 count pack for 3.543” OD glass.

This 18 count box is Static Dissipative.  By using #102 FLAT LID, this box will hold parts 2.5” long x 2.5” wide x .53” thick.
By using deeper lids, you can hold taller parts.  Using #102D lid shown on the drawing, this box will hold parts up to 3.125” tall.  Using lid #201-01 allows parts up to 3.55”. Using lid #102 DD Lid allows parts up to 4.125” tall to be protected. A flat polyethylene pad can be used to take up space beneath the lid if your part doesn’t go all the way up.  This prevents parts from wiggling in their respective pocket.

Call for samples and assistance.
This box can be customized to hold your specific size.  See image #2 FOR EXAMPLES of customized boxes using the same exterior size. 
You only pay for the insert to customize the existing box.

This 24 count box is Static Dissipative.  By using #102 FLAT LID, this box will hold parts 2.0” long x 1.75” wide x .50” thick.
By using deeper lids, you can hold taller parts.  Using #102D lid shown on the drawing, this box will hold parts up to 2.625” tall.  Using lid #201-01 allows parts up to 3.05”. Using lid #102 DD Lid allows parts up to 3.625” tall to be protected. A flat polyethylene pad can be used to take up space beneath the lid if your part doesn’t go all the way up.  This prevents parts from wiggling in their respective pocket.

Call for samples and assistance.
This box can be customized to hold your specific size.  See image #2 FOR EXAMPLES of customized boxes using the same exterior size. 
You only pay for the insert to customize the existing box.

Static Dissipative tray for .3.75” Square slides

Static dissipative 15 count pack for 3.858” OD glass.

Static dissipative 30 count package for glass or ceramic 4” square.  see also #25S-4062w for thicker glass and #75S-4062 for more parts per package.

Static dissipative 75 count pack for 4” squares.  see also #24S-4409 for thicker glass (up to 12.7mm) sized 4” to 4.4” square or round.  see also #75S-4562 for 3mm thick glass squares up to 4.5” square

Static dissipative 25-count box with flat lid for 4.0"Round.

This 18 count box is Static Dissipative.  By using #102 FLAT LID, this box will hold parts 2.5” long x 2.5” wide x .53” thick.
By using deeper lids, you can hold taller parts.  Using #102D lid shown on the drawing, this box will hold parts up to 3.125” tall.  Using lid #201-01 allows parts up to 3.55”. Using lid #102 DD Lid allows parts up to 4.125” tall to be protected. A flat polyethylene pad can be used to take up space beneath the lid if your part doesn’t go all the way up.  This prevents parts from wiggling in their respective pocket.

Call for samples and assistance.
This box can be customized to hold your specific size.  See image #2 FOR EXAMPLES of customized boxes using the same exterior size. 
You only pay for the insert to customize the existing box.

Static dissipative 25 count package for 4.3 inch square or round.
Rectangular parts can be held using the deep lid, available as an option. Image 1 shows cross section of the box with a flat lid.

Static dissipative tray for 4.4” square or round, use reversible lid for full enclosure.

Static dissipative 75 count package for 4.5” squares or round x .125” thick.  see image 2 below #24S-4409 for thicker parts over 4” square up to 4.4” square

Static dissipative 24 count package for 4.75 x 4.25 inch square or round.
This box can be customized to meet your exact requirements.

Static dissipative 36 count tray.  Reversible design allows parts 4.75” square to be enclosed.

Static dissipative 25 count box and lid for 101mm square glass up to 4mm thick.  Great for solar cell archiving.
see also #30S-4062w for thinner glass sized 101mm x 101mm square (or round0

Static dissipative 25 count package for 5 inch square or round (See also #25R-5062).
Image 1 shows cross section of the box with a flat lid.

Static dissipative 25-count box with flat lid for 5.0” Round.

Twist lock single wafer pack with Flexy spring to gently hold your wafer in place, Static Dissipative, strong and protective, absorbs shock, stackable

Static dissipative 25-count box with flat lid for 5.90” Round.

Static dissipative 25 count package for 6.3 inch round.
Rectangular parts can be held using the deep lid, available as an option. Image 1 shows cross section of the box with a flat lid.

Static dissipative, reversible box with 25 count molded insert with V groove slots to hold 161.2mm square or round glass. The outer box has 25.4mm wall thickness to provide durable protection.  Insert can be customized to hold your particular glass dimension.

Static dissipative 25 count package for 7 inch round.
Rectangular parts can be held using the deep lid, available as an option.

Static dissipative, reversible box with 11 count molded insert with Round .25” thick class. Holds 7.875” OD round glass.  Insert can be customized to hold your particular glass dimension.

This single wafer pack can gently hold a 215.9mm dia and 162mm square wafer in place, Static Dissipative, strong and protective, absorbs shock, stackable

This single wafer pack can gently hold a 254mm dia wafer in place, Static Dissipative, strong and protective, absorbs shock, stackable

Twist lock single wafer pack with Flexy spring to gently hold your wafer in place, Diameters ranging fro 254 to 338 mm can be held. Static Dissipative, strong and protective, absorbs shock, stackable

This single wafer pack can gently hold a 304.8mm dia wafer in place, Static Dissipative, strong and protective, absorbs shock, stackable